FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Front Pull Winch Receiver Replacement › Installation Procedure

Installation Procedure

    Fig 1: Front Pull Winch Receiver
    GM797573Courtesy of GENERAL MOTORS CORP.
  1. Install the winch receiver to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the receiver bolts to the frame.

    Tighten:  Tighten the bolts to 85 N.m (63 lb ft).

  3. Install the bumper. Refer to Bumper Replacement - Front in Bumpers.
About FixVault