FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Steering Wheel And Column › Repair Instructions › Steering Column Shaft Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Steering Shaft
    GM667564Courtesy of GENERAL MOTORS CORP.
  1. Install the steering shaft (1) into the steering column tilt head assembly.
  2. Install the steering column tilt head. Refer to Steering Column Tilt Head Housing Replacement .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 .
About FixVault