FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Body & Frame › Seats › Repair Instructions › Heated Seat Switch Replacement - Front › Installation Procedure

Installation Procedure

    Fig 1: Front Heated Seat Switch
    GM833444Courtesy of GENERAL MOTORS CORP.
  1. Install the front seat heater switch to the front trim panel by pressing the switch into place until the switch is completely seated.
  2. Connect the electrical connector to the front seat heater switch.
  3. Install the front trim panel. Refer to Trim Panel Replacement - Side Front Door in Doors.
About FixVault