FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Body & Frame › Seats › Repair Instructions › Seat Back Latch Replacement - Rear › Installation Procedure

Installation Procedure

    Fig 1: Rear Seat Back Latch
    GM814964Courtesy of GENERAL MOTORS CORP.
  1. Install the seat belt guide (1) to the latch assembly, if removed.
  2. Install the spacer (2) to the latch assembly, if removed.
    3. Fig 2: Rear Seat Back Latch Assembly
    GM788614Courtesy of GENERAL MOTORS CORP.
  3. Install the seat back latch assembly to the seat frame.
  4. Attach the recliner cables to the folding mechanism.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the bolts (1, 2) that retain the latch assembly to the seat frame.

    Tighten:  Tighten the bolts to 45 N.m (33 lb ft).

  6. Install the screw (3) that retains the latch assembly to the seat frame.

    Tighten:  Tighten the screw to 25 N.m (18 lb ft).

  7. Install the seat back cover. Refer to Seat Back Cover and Pad Replacement - Rear .
  8. Install the armrest, if equipped. Refer to Armrest Replacement - Rear Seat .
  9. Install the rear seat to the vehicle. Refer to Seat Replacement - Rear No. 1 .
About FixVault