FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Body & Frame › Seats › Repair Instructions › Seat Back Recliner Handle Replacement - Front › Installation Procedure

Installation Procedure

    Fig 1: Front Seat Back Recliner Handle
    GM378527Courtesy of GENERAL MOTORS CORP.
  1. Position the recliner handle on the side shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screw retaining the recliner handle to the trim panel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

About FixVault