FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Traction Control Switch Replacement › Removal Procedure

Removal Procedure

    Fig 1: Traction Control Switch & I/P Assembly
    GM793124Courtesy of GENERAL MOTORS CORP.
  1. Remove the center I/P trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
  2. Gently lift the retaining tabs and remove the traction control switch (1) from the instrument panel (I/P) assembly (2).
  3. Disconnect the harness connector from the traction control switch (1).
About FixVault