FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Wheel Speed Sensor Replacement - Rear › Removal Procedure

Removal Procedure

    Fig 1: Rear Wheel Speed Sensor & Shim
    GM913375Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the electrical connector.
  3. Remove the wheel speed sensor retaining bolt.
    4. IMPORTANT: If a shim was removed when the wheel speed sensor was removed, it must be reinstalled to ensure proper operation.
  4. Remove the wheel speed sensor and shim if present.
About FixVault