FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Electrical › Gauges › Instrument Panel, Gages, And Console › Repair Instructions › CUPHOLDER Replacement › Installation Procedures

Installation Procedures

    Fig 1: Cup Holder
    GM833291Courtesy of GENERAL MOTORS CORP.
  1. Connect the lamps to the cup holder.
  2. Align the cup holder to the center console.
  3. Push the cup holder firmly into place to engage the clips.
    4. Fig 2: Identifying Shifter
    GM833294Courtesy of GENERAL MOTORS CORP.
  4. Install shift handle to shifter and use hex nut to fasten in place.

    Tighten:  Tighten the nut to 1.6 N.m (14 lb in).

About FixVault