FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Electrical › Gauges › Instrument Panel, Gages, And Console › Repair Instructions › Center Console End Panel Replacement › Installation Procedure

Installation Procedure

    Fig 1: Electrical Connectors & Center Console End Panel
    GM832798Courtesy of GENERAL MOTORS CORP.
  1. Connect electrical connectors to console end panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 2: Center Console End Panel
    GM816358Courtesy of GENERAL MOTORS CORP.
  2. Install the center console end panel.
  3. Install the center console end panel screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

About FixVault