FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › External Pages › Different car › Section 229 (Anti-Lock Brake System) › Repair Instructions › Air Cleaner Intake Duct Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor electrical connector.
  2. Loosen the air cleaner intake and MAF/IAT assembly clamps from the throttle body side and from the air cleaner cover side.
  3. Remove the air cleaner intake and MAF/IAT assembly from the vehicle.
  4. Separate the air cleaner intake duct from the MAF/IAT sensor.
About FixVault