FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › External Pages › Different car › Section 356 (Lighting Systems) › Repair Instructions › Fog Lamp Bulb Replacement-Front › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fog lamp bulb into the lamp housing by turning 1/4 turn clockwise.
  2. Connect the electrical connector.
  3. Install the air deflector. Refer to AIR DEFLECTOR REPLACEMENT - FRONT in Body Front End.
  4. Lower the vehicle.
    Fig 1: Installing Fog Lamp Bulb Into Lamp Housing
    G01506985Courtesy of GENERAL MOTORS CORP.
About FixVault