Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Position the assist handle (3) in the headliner.
NOTE: Refer to COMPONENT FASTENER TIGHTENING NOTICE in Cautions and Notices.
Install the fasteners (1) in order to secure the assist handle.
Tighten

Tighten the fasteners to 3 N.m (27 lb in).
Snap the end cap covers (2) into position.

Fig 1: Installing Assist Handle
Courtesy of GENERAL MOTORS CORP.