Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Turn the socket.
Lock the socket in place.
Install the tail/turn signal lamp assembly to the vehicle with the 2 screws.

Fig 1: Installing Tail/Turn Signal Lamp (Except Stepside)

Courtesy of GENERAL MOTORS CORP.

Close the endgate.

Fig 2: Tail/Turn Signal Lamp (Except Stepside)

Courtesy of GENERAL MOTORS CORP.

Inspect the operation.