Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors to the headlamp switch.

Fig 2: Headlamp Switch

Courtesy of GENERAL MOTORS CORP.

Align and install the headlamp switch to the instrument panel.

Fig 3: I/P Trim Plate

Courtesy of GENERAL MOTORS CORP.

Install the instrument panel trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Left in Instrument Panel, Gauges, and Console.