Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: I/P Lamp & Base Assembly

Courtesy of GENERAL MOTORS CORP.

Install the bulb to the base.
Install the bulb and base assembly into the IPC by turning the bulb 1/2 turn clockwise.

Fig 2: IPC Rear Cover Plate

Courtesy of GENERAL MOTORS CORP.

Carefully snap the rear cover plate to the IPC.
Install the IPC. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gauges and Console.