Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Open the instrument panel (I/P) door to a full down position.
Route the replacement coax cable alongside the existing cable using electrical tape.
Install the radio. Refer to Radio Replacement .

Fig 1: Antenna Extension Cable & Antenna Cable

Courtesy of GENERAL MOTORS CORP.

Connect the antenna extension cable (2) to the antenna cable (1).
Install the right kick-up panel. Refer to Kick-Up Panel Replacement - Front Floor in Interior Trim.
Install the right sill plate. Refer to Door Sill Plate Replacement - Front in Interior Trim.