Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 1: Identifying Retaining Nut Of Antenna Assembly

Courtesy of GENERAL MOTORS CORP.

Attach the antenna base to the roof and fasten the bolt.
Tighten: Tighten the bolt to 2 N.m (18 lb in).
Connect the electrical connector to the antenna module.
Push the headliner back into place. Refer to Headliner Replacement in Interior Trim.
Attach the right side sunshade to the headliner. Refer to Sunshade Replacement in Interior Trim.
Attach the right side windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.