Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Microphone & Overhead Console

Courtesy of GENERAL MOTORS CORP.

Install the microphone (2) to the overhead console.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the microphone screws (1).
Tighten: Tighten the microphone screws to 2 N.m (18 lb in).
Install the overhead console. Refer to Console Replacement - Overhead (Full Length) or Console Replacement - Overhead (Short Length) in Interior Trim.