Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Longitudinal Accelerometer

Courtesy of GENERAL MOTORS CORP.

Install the longitudinal accelerometer.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the longitudinal accelerometer retaining screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Install I/P bezel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument Panel, Gauges and Console.