FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › External Pages › Different car › Section 578 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Instrument Panel (I/P) Module Disable Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel trim bezel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gauges and Console.
    2. Fig 1: Inflatable Restraint Instrument Panel (I/P) Module Disable Switch
    GM412186Courtesy of GENERAL MOTORS CORP.
  2. Remove the I/P module switch from the lower right opening of the switch plate panel.
  3. Disconnect the I/P module switch electrical connector.
About FixVault