FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › External Pages › Different car › Section 587 (Transfer Case - BW 4484) › Repair Instructions › Transfer Case Shift Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transfer Case Shift Control Module
    GM860519Courtesy of GENERAL MOTORS CORP.
  1. Remove the knee bolster. Refer to Trim Panel Replacement - Knee Bolster in Instrument Panel, Gauges, and Console.
  2. Disconnect the shift control module electrical connectors.
  3. Reposition the harness.
  4. Remove the module from the vehicle.
About FixVault