Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brush Guard Bolt | 50 N.m | 37 lb ft |
| Grille Retaining Nut | 9 N.m | 80 lb in |
| Quarter Panel Upper Applique Screw | 3 N.m | 26 lb in |
| Wheel Flare Front Retaining Screws | 3 N.m | 26 lb in |
| Wheel Flare Rear Retaining Screws | 3 N.m | 26 lb in |
| Windshield Pillar Reveal Molding | 3 N.m | 26 lb in |