Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Pull Winch Receiver

Courtesy of GENERAL MOTORS CORP.

Install the winch receiver to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the receiver bolts to the frame.
Tighten: Tighten the bolts to 85 N.m (63 lb ft).
Install the bumper. Refer to Bumper Replacement - Front in Bumpers.