Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Differential Adjuster Lock Nut Bolt | 20 N.m | 15 lb ft |
| Differential Carrier Assembly Case Bolts | 78 N.m | 58 lb ft |
| Differential Carrier Assembly Mounting Bolts and Nuts | 100 N.m | 75 lb ft |
| Differential Carrier Assembly Hole Plug | 28 N.m | 21 lb ft |
| Inner Axle Shaft Housing to Frame Mounting Bolt and Nut | 100 N.m | 75 lb ft |
| Inner Axle Shaft Housing to Differential Carrier Assembly Bolts | 40 N.m | 30 lb ft |
| Pinion Shaft Lock Bolt | 53 N.m | 39 lb ft |
| Plug, Drain and Fill | 33 N.m | 24 lb ft |
| Ring Gear Bolts | 138 N.m | 102 lb ft |
| Stabilizer Link Nut | 18 N.m | 13 lb ft |
| Vent Connector | 20 N.m | 15 lb ft |
| Wheel Drive Shaft Inboard Flange Bolts | 79 N.m | 58 lb ft |
| Yoke Retainer Bolts | 25 N.m | 18 lb ft |