FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › External Pages › Different car › Section 602 (Hydraulic Brake System) › Repair Instructions › Master Cylinder Fluid Level Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Master Cylinder Fluid Level Sensor
    GM913292Courtesy of GENERAL MOTORS CORP.
  1. Install the fluid level sensor until the locking tabs snap into place.
  2. Connect the electrical connector to the fluid level sensor.
About FixVault