Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electrical Connector & Sunroof Switch

Courtesy of GENERAL MOTORS CORP.

Install the sunroof switch to the vehicle.
Install the sunroof switch through the retaining clips to secure into place.
Connect the electrical connector to the sunroof switch.
Engage the mounting tabs and push the overhead console rearward.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws to the overhead console.
Tighten: Tighten the screws to 3 N.m (26 lb in).