FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › External Pages › Different car › Section 657 (Body Front End) › Repair Instructions › Body Panel Adjustment

Body Panel Adjustment

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

The rear tip of the front fender is adjusted outward by installing a retainer (shim) GM P/N 10412533 to the door flange.

    Fig 1: Installing Retainer To Leaning Edge Of Door Flange
    GM441871Courtesy of GENERAL MOTORS CORP.
  1. Open the door.
  2. Install a retainer (shim), GM P/N 10412533, to the leaning edge of the door flange.
  3. Close the door and check the alignment.
About FixVault