FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › External Pages › Different car › Section 743 (Door System, Mirror System & Window System) › Repair Instructions › Module Replacement - Front Power Window › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the window.
  2. Remove the trim panel. Refer to Trim Panel Replacement - Side Front Door   . 
  3. Remove the water deflector. Refer to Water Deflector Replacement - Front Door   . 
  4. Disconnect the wiring harness from the window motor assembly.
  5. Remove the 2 bolts holding the window to the regulator.
  6. Remove the bolts from the window regulator.
  7. Remove the window regulator assembly from the door folding both sides together.
    Fig 1: Removing Front Power Window Module
    G01577965Courtesy of GENERAL MOTORS CORP.
About FixVault