Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the retractor to the vehicle.
NOTE: Refer to FASTENER NOTICE .
Install the rear seat belt retractor to body bolt (1).
Tighten

Tighten the bolt to 53 N.m (39 lb ft).
Install the rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT-REAR QUARTER (REGULAR CAB) or TRIM PANEL REPLACEMENT-REAR QUARTER (EXTENDED CAB) or TRIM PANEL REPLACEMENT-REAR QUARTER (CREW CAB) .

Fig 1: Installing Rear Seat Belt Retractor To Body Bolt (Extended Cab)
Courtesy of GENERAL MOTORS CORP.
Install the rear seat belt to body bolts (2).
Tighten

Tighten the bolts to 53 N.m (39 lb ft).
Install the seat belt guide cover (1).

Fig 2: Installing Seat Belt Guide Cover & Bolts
Courtesy of GENERAL MOTORS CORP.
Install the rear seat. Refer to SEAT REPLACEMENT-REAR (EXTENDED CAB W/4TH DOOR) or SEAT REPLACEMENT-REAR (EXTENDED CAB) or SEAT REPLACEMENT-REAR (60/40 SPLIT) .

Fig 3: Installing Rear Seat (Extended Cab)
Courtesy of GENERAL MOTORS CORP.