FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › External Pages › Different car › Section 775 (Sunroof System) › Repair Instructions › Sunroof Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Sunroof Switch With Fasteners
    GM977981Courtesy of GENERAL MOTORS CORP.
  1. Install sunroof switch with fasteners.

    Tighten:  Tighten sunroof switch to 2.5 N.m (22 lb in)

    2. Fig 2: Disconnecting/Connecting Electrical Connectors At Reading Lamp Cover/Sunroof Switch
    GM980440Courtesy of GENERAL MOTORS CORP.
  2. Connect sunroof switch harness to sunroof switch.
  3. Position front reading lamp cover into rear attaching hooks.
  4. Rotate front reading lamp cover into lamp assembly forward, then snap cover into place.
  5. Function sunroof switch to ensure proper operation.
About FixVault