FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › HVAC Systems - Automatic › Repair Instructions › Blower Motor Control Processor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Blower Motor Control Processor & HVAC Module Assembly
    GM826796Courtesy of GENERAL MOTORS CORP.
  1. Remove the I/P insulator panel. Refer to Insulator Replacement - Instrument Panel (I/P) .
  2. Disconnect the electrical connector (2) from the blower motor (1).
  3. Disconnect the electrical connector (4) from the blower motor control processor (3).
  4. Remove the screws from the blower motor control processor (3).
  5. Remove the blower motor control processor (3) from the HVAC module assembly.
About FixVault