FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › HVAC Systems - Automatic › Repair Instructions › HVAC Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: HVAC Control Module & I/P Panel
    GM810847Courtesy of GENERAL MOTORS CORP.
  1. Remove the center I/P trim bezel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
  2. Remove the screws from the HVAC control module (2).
  3. Depress the HVAC control module tabs (3) and remove the HVAC control module (2) from the I/P (4).
  4. Reposition the HVAC control module (2) from the I/P panel (1).
  5. Disconnect the electrical connectors from the HVAC control module (2).
About FixVault