FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › HVAC Systems - Automatic › Repair Instructions › Sun Load Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Sun Load Sensor & I/P Upper Trim Pad
    GM870457Courtesy of GENERAL MOTORS CORP.
  1. Remove the I/P upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
  2. Remove the sun load sensor from the I/P upper trim pad by turning counter clockwise.
  3. Disconnect the electrical connector from the sun load sensor.
About FixVault