FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Gear Inlet Pipe/Hose Replacement › Removal Procedure

Removal Procedure

    NOTE: Refer to Power Steering Hose Disconnected Notice .
    Fig 1: Power Steering Gear Inlet Hose & Brake Booster
    GM793264Courtesy of GENERAL MOTORS CORP.
  1. Install a drain pan under the vehicle.
  2. Remove the power steering gear inlet hose from the brake booster.
    3. Fig 2: Power Steering Gear Inlet Hose & Power Steering Gear
    GM793265Courtesy of GENERAL MOTORS CORP.
  3. Remove the power steering gear inlet hose from the power steering gear.
  4. Remove the power steering gear inlet hose from the vehicle.
About FixVault