FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Steering Gear Housing End Plug Replacement - Off Vehicle › Disassembly Procedure

Disassembly Procedure

    Fig 1: Steering Gear Housing End Plug Assembly
    GM322010Courtesy of GENERAL MOTORS CORP.
  1. Rotate the stub shaft back and forth to drain the fluid.
  2. Insert a punch into the housing access hole to unseat the retaining ring (1).
  3. Remove the plug (2).
  4. Remove the O-ring seal (3).
About FixVault