FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Steering › Steering Linkage (Non-Rack & Pinion) › Repair Instructions › Tie Rod Replacement - Inner › Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the engine protection shield. Refer to ENGINE PROTECTION SHIELD REPLACEMENT .
  3. Remove the outer tie rod ends. Refer to Tie Rod Replacement - Outer .
    4. Fig 1: Removing/ Installing Inner Tie Rods Ends
    GM865341Courtesy of GENERAL MOTORS CORP.
  4. Remove the inner tie rod ends using the J 34028  . See Special Tools .
About FixVault