FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Introduction, Removal & Installation & Service › Repair Instructions › Manual Detent Spring Installation

Manual Detent Spring Installation

    Fig 1: Manual Detent Spring Bolt & Assembly
    GM13263Courtesy of GENERAL MOTORS CORP.
  1. Inspect the manual detent spring assembly (63) for cracks or damage.
  2. Install the manual detent spring assembly (63).
    3. NOTE: Refer to Fastener Notice .
  3. Install the manual detent spring bolt (64).

    Tighten:  Tighten the bolt to 20-27 N.m (15-20 lb ft).

About FixVault