FixVault
Home › Hummer › 2003 › H2 › Repair and Diagnosis › Transmission › Transfer Case - BW 4484 › Repair Instructions › Transfer Case Speed Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the electrical connector from the speed sensor.
    Fig 1: Electrical Connector & Speed Sensor
    GM860433Courtesy of GENERAL MOTORS CORP.
    3. Fig 2: View Of Vehicle Speed Sensor (VSS) & O-Ring Seal
    GM819577Courtesy of GENERAL MOTORS CORP.
  3. Remove the speed sensor and the O-ring from the transfer case.
About FixVault