FixVault
Home › Hummer › 2004 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Seat Switch Replacement - Power › Installation Procedure

Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Power Seat Switch
    GM663330Courtesy of GENERAL MOTORS CORP.
  1. Install the power seat switch to the bezel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    2. Fig 2: View Of Seat Switch Bezel
    GM389092Courtesy of GENERAL MOTORS CORP.
  2. Install the power seat switch to bezel screws.
  3. Install the power seat switch bezel to the seat. Refer to Seat Switch Bezel Replacement .
About FixVault