FixVault
Home › Hummer › 2004 › H2 4D Utility Pickup › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Negative Cable Replacement › Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    Fig 1: View Of Negative Battery Cable At Battery
    GM832902Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) .
    2. Fig 2: Forward Lamp Wiring Harness Ground/Negative Cable Bolt
    GM662101Courtesy of GENERAL MOTORS CORP.
  2. Raise and suitably support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the engine protection shield. Refer to Engine Protection Shield Replacement in Frame and Underbody.
  4. Remove the forward lamp wiring harness ground/negative cable bolt.
  5. Remove the engine wiring harness ground/negative cable bolt.
  6. Remove the negative battery cable.
About FixVault