FixVault
Home › Hummer › 2004 › H2 4D Utility Pickup › Repair and Diagnosis › External Pages › Different car › Section 710 (Seats) › Repair Instructions › Memory Seat Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  2. Remove the seat cushion. Refer to Seat Cushion Frame Replacement - Front .
    3. Fig 1: Locating Memory Module Harness Connectors & Retaining Screws
    GM378544Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the harness connectors (2).
  4. Remove the memory module retaining screws (1).
    5. Fig 2: Removing/Installing Memory Module
    GM381489Courtesy of GENERAL MOTORS CORP.
  5. Slide the module out.
  6. Remove the module from the vehicle.
About FixVault