FixVault
Home › Hummer › 2004 › H2 4D Utility Pickup › Repair and Diagnosis › Transmission › Transfer Case - BW 4484 › Repair Instructions › Transfer Case Motor/Encoder Replacement › Removal Procedure

Removal Procedure

    Fig 1: Transfer Case Encoder/Motor Assembly
    GM819575Courtesy of GENERAL MOTORS CORP.
  1. Remove the transfer case shield. Refer to Transfer Case Shield Replacement .
  2. Disconnect the encoder motor electrical connector.
  3. Remove the encoder motor bolts.
  4. Remove the encoder motor.
  5. Remove the actuator insulator.
About FixVault