FixVault
Home › Hummer › 2005 › H2 4D Utility Pickup › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Body Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: Body Control Module
    GM832802Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages, and Console.
  3. Remove the body control module (BCM) (1) from the BCM bracket.
About FixVault