Installation Procedure

Fig 1: View Of Ground Strap Nut At Front Of Dash Stud

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the ground strap to the stud.
Install the ground strap nut to the stud at the front of dash.
Tighten: Tighten the nut to 9 N.m (80 lb in).
Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

Fig 2: View Of Ground Cable Bolt At Engine Block

Courtesy of GENERAL MOTORS CORP.

Position the ground strap and engine wiring harness ground.
Install the engine wiring harness ground bolt.
Tighten: Tighten the bolt to 16 N.m (12 lb ft).
Install the left hand catalytic convert. Refer to Catalytic Converter Replacement in Engine Exhaust.
Lower the vehicle.