FixVault
Home › Hummer › 2005 › H2 4D Utility Pickup › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Air Cleaner Resonator Outlet Duct Replacement › Installation Procedure

Installation Procedure

    Fig 1: MAF/IAT Sensor & Air Cleaner Assembly
    GM832908Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner resonator outlet duct to the throttle body assembly and the MAF/IAT sensor assembly.
  2. Tighten the clamps at the throttle body assembly and the MAF/IAT sensor assembly.
About FixVault