Inspection/Maintenance (I/M) Evaporative Emission (EVAP) System Set Procedure: Description

The purpose of this procedure is to satisfy the enable criteria necessary to execute inspection/maintenance (I/M) readiness diagnostics for the Evaporative Emission (EVAP) System. The procedure may be used to set the EVAP I/M System Status display on the scan tool to YES. The EVAP I/M System Status display indicates whether or not the control module has completed the readiness diagnostics. The readiness diagnostics complete when all DTCs comprising the diagnostics run and pass, or any DTC comprising the diagnostics illuminates the malfunction indicator lamp (MIL). If the diagnostics pass during one drive cycle, seventeen hours must elapse, regardless of whether the vehicle is driven or not. Then, the diagnostics will run again during the next drive cycle in which the conditions for running are met. Once the diagnostics have passed during the third drive cycle, the EVAP I/M System Status display will be updated to YES. A failed or aborted diagnostic will require the vehicle to cool down in order to meet the enable criteria for another drive cycle. Therefore, performing a visual inspection prior to running the EVAP test may prevent having to repeat the drive cycle.