FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Steering Wheel And Column › Repair Instructions › Steering Column Shaft Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Steering Shaft
    GM667564Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the steering column tilt head. Refer to Steering Column Tilt Head Housing Replacement .
  3. Remove the steering shaft (1) from the steering column tilt head assembly.
  4. Inspect the steering column for accident damage. Refer to Steering Column Accident Damage Inspection .
About FixVault