FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Seats › Repair Instructions › Head Restraint Replacement › Installation Procedure

Installation Procedure

  1. Connect the video connector if the head restraint is equipped with the video display.
    2. Fig 1: Head Restraint
    GM867067Courtesy of GENERAL MOTORS CORP.
  2. Install the head restraint by pushing down on restraint until the restraint is fully seated.
  3. Pull up in order to ensure that the head restraint engages with the head restraint retainers (1).
About FixVault