FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Seats › Repair Instructions › Head Restraint Replacement › Removal Procedure

Removal Procedure

    Fig 1: Head Restraint
    GM867067Courtesy of GENERAL MOTORS CORP.
  1. Pull the head restraint to the full height position.
  2. Insert a pointed tool into the access hole (1) and press inwards.
  3. Pull the head restraint from the seat.
  4. Disconnect the video connector if the head restraint is equipped with the video display.
About FixVault