FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Seats › Repair Instructions › Power Seat Switch Replacement › Installation Procedure

Installation Procedure

NOTE: Refer to Fastener Notice .
    Fig 1: View Of Power Seat Switch & Screws
    GM663330Courtesy of GENERAL MOTORS CORP.
  1. Install the power seat switch to the bezel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    2. Fig 2: View Of Seat Switch Bezel
    GM389092Courtesy of GENERAL MOTORS CORP.
  2. Install the power seat switch to bezel screws.
  3. Install the power seat switch bezel to the seat. Refer to Seat Switch Bezel Replacement .
About FixVault